Full HD Splitter 1×2 Port HDMI Splitter Amplifier Repeater 3D 1080p

Full HD Splitter 1×2 Port HDMI Splitter Amplifier Repeater 3D 1080p Female Switch Box Hub

SPECIFICATIONS:
Input video signal:0.5-1.0 volts p-p
Input DDC signal:5 volts p-p
max single link range:1920 x 1200,1080P
HDMI resolution:480i/576i/480P/576P/720P/1080i/1080P
DVI resolution: 480P/576i/576P/720P/1080i/1080P
HDMI version: HDMI 1.3b
Bandwidth: up to 225MHz
EDID duration:4 seconds
Power supply:DC5V@1A

CONNECTION AND OPERATION:
1.Connect the input source and output displays to the HDMI splitter.
2.Connect the DC 5V power supply to the splitter .Please kindly note that power supply with higher voltage may damage the splitter.
3.When input source and output displays are connected and tumid on .

The corresponding LED will light.

*Attention: In order to protect the splitter and your devices ,please make sure the splitter is powered off before you attach in or extract video source and displays, please insert and extract HDMI cables gently.

FAQ：
1.The Full HD Splitter doesn’t appear to he functioning.
Firstly ,check if the LED light, if the power supply is in good condition and well connected.
Thirdly ,make sure the length of the cables is within the maximum supported length of this splitter.
Lastly, please try to connect the input source to the display directly to see if it display normally.
2. If the maximum resolution the two displays supported is not the same, what resolution will be displayed?
The Full HD Splitter will display at the lower one to both displays.

Package Included:

1 x HDMI Splitter

Too See More HDMI supplies      click here
Visit Alasad Store Face book       click here