Ugreen USB type C to RJ45 Console Flat Cable 1.5m

Console Configuration Cable

Ugreen USB Type C to RJ45 Console Cable connects from a computer USB type C port to the RJ45 console port of a networking switch or router. This rollover cable connects a laptop with Windows, Linux or macOS to a Cisco-standard serial console port for configuration and management. The integrated FTDI chipset handles the USB type C signaling and protocol functions including an RS-232 level shifter. FTDI drivers are available for download.

Specifications

• Host Connector: USB type C 2.0 Male
• Console Port Connector: RJ45 8P/8C Male

OS Compatibility

• Windows 7 and up for 32/64 bit computers
• macOS 9 and up
• Linux Ubuntu 11.10 and up

Important Notes

• Administrator permission is required
• Windows 10 requires a CLI terminal utility such as PuTTy for configuration
• NOT a crossover cable that reverses TX and RX
• Will NOT operate over an Ethernet port for internet access

Console Cable Functions

• Directly connect to a console port on a network switch
• FTDI drivers are integrated into the latest versions of Windows 10 and macOS
• Configure a switch or router with direct terminal access from your computer

Rollover Cable

• Rollover cable reverses all 8 pins to connect from a computer to a network switch
• Cisco-standard wiring pin-out (check the requirements of your equipment)
• Data transfer rate up to 250 Kbps
• Bus-powered cable

Feature-Filled Cable

1. Molded strain-relief for frequent use
2. Snagless RJ45 clip protector
3. Flexible PVC cable jacket