Products with electrical plugs are designed for use in the US. Outlets and voltage differ internationally and this product may require an adapter or converter for use in your destination.
Amp / Tyco 406372-6 NetConnect Cat5e SL 110 RJ45 Jack
Category 5e snap-in jack for Quickport
Dual color coded for both T568A and T568B wiring patterns
Compare
Based on 0 reviews
Be the first to review “Amp / Tyco 406372-6 NetConnect Cat5e SL 110 RJ45 Jack” Cancel reply
Related products
-
15 EL KALIFA, TOOLS, NETWORKING TOOLS, Measuring and testing equipment
دبست نيتورك 314 ب
0 out of 5(0)أداة الثقب HT-314B هي نوع من أدوات التثقيب ، مثل المفك اللولبي حيث يتوفر مع حرف U معكوس في الأسفل. إنها أداة خاصة يمكنها توصيل الكبل بوحدات البيانات عن طريق التثقيب.
يتداخل المقبس والوحدة معًا ، ويتم توصيل السلك المدفون في الجدار من خلال وحدة المعلومات. يتم توصيل كابل الشبكة الداخلية ووحدة المعلومات بالجدار بواسطة ثمانية نوى لكابل الشبكة وفقًا لـ أحكام بطاقة الفتحة المقابلة في وحدة المعلومات. هناك حاجة إلى أداة خاصة لقص الأسلاك ، تسمى “أداة قص الأسلاك” ، لإدخال الكابل.
يتم تطبيق أداة التثقيب هذه لتوصيل الكابلات والوحدة والأسلاك. رأسها مصنوع من الفولاذ الكربوني الخاص للحصول على استخدام دائم. إنه ملائم لأنواع متعددة من المنتجات وسهل الاستخدام.
بالإضافة إلى ذلك ، يحتوي على بعض الميزات التالية:
رؤوس قاطعة مزدوجة
ينطبق على cat5e ، cat6 ، cat7 ؛
110 نوع سكين خيوط.
تثقيب خط واحد
جهاز المساعدة المتاح ؛
لسلك الجلوس في الطرف الأسود أو قطع نهاية السلك بعد الإنهاء ؛
مناسب لكابل STP / UTP ، كابل محوري ، خط هاتف ، حجر الزاوية RJ45 ؛
مقبض بلاستيكي ، شفرة فولاذية.SKU: n/a -
15 EL KALIFA, NETWORKING TOOLS
Impact Punch Down Tool Blade 110/88 Network Wire Punch Down Cable Cat5e Cat6 YUN
15 EL KALIFA, NETWORKING TOOLSImpact Punch Down Tool Blade 110/88 Network Wire Punch Down Cable Cat5e Cat6 YUN
0 out of 5(0)Impact Punch Down Tool Blade 110/88 Network Wire Punch Down Cable Cat5e Cat6 YUN
SKU: 1000000001841275,00 EGP -
15 EL KALIFA, NETWORK, NETWORK, NETWORK, Networking, NETWORKING TOOLS
M726AT LAN RJ45 RJ11 USB Cable Tester – Black + Blue (1 x 9V)
15 EL KALIFA, NETWORK, NETWORK, NETWORK, Networking, NETWORKING TOOLSM726AT LAN RJ45 RJ11 USB Cable Tester – Black + Blue (1 x 9V)
0 out of 5(0)الميزات: * اللون: أسود + أزرق * الخامة: غلاف بلاستيكي
الأبعاد: 13.1 × 6.5 × 2.9 سم / 5.16 × 2.56 × 1.14 بوصة * الوضع: الوضع التلقائي / اليدوي
يتكون من فاصل رئيسي وعن بعد * كبل اختبار مثبت بعيدًا إما على لوحة التوصيل أو لوحة الحائط التي يمكن أن تستخدم الطرف البعيد * يدعم كبل الاختبار: USB (A / A) ، USB (A / B) ، كابل RJ45 ، كابل RJ11
* TX: 1 × RJ45 + 1 × USB A-Tape + 1 × USB B-Tape ؛ RX: 2 × RJ45 + 2 × شريط USB A.
مدعوم من بطارية 1 × 9 فولت (غير مدرجة)SKU: n/a -
15 EL KALIFA, TOOLS, NETWORKING TOOLS
FACE PLATE TOOLS 314B
0 out of 5(0)HT-314B punch tool is a kind of punch tools, like a screw-driver where is available with a inverted U in the bottom. It is a special tool that can connect the cable with the data modules by punching.
The socket and the module are nested together, and the wire buried in the wall is threaded through the information module.Connected with the external network cable, the wall internal network cable and information module is connected by the eight cores of the network cable according to the provisions of the corresponding slot card into the information module. A special wire clipping tool, called “wire clipper”, is needed to insert the cable.
This punch tool is applied for cable, module, wiring connection. Its head is made by special carbon steel to abtain a durable usage. It is convinient for multiple types of products and easy for using.
Additionally, it has some features following:
- Double cutter heads;
- Applicable for cat5e, cat6, cat7;
- 110 type threading knife;
- Single line punching;
- Available assist device;
- For seating wire into terminal black or cut off wire end after terminated;
- Suitable for STP/UTP cable, coaxial cable, telephone line, RJ45 keystone;
- Plastic molded handle, steel blade.
SKU: 1000000001853
There are no reviews yet.